Puyang Zhongshi Group Co., Ltd.
Puyang Zhongshi Group Co., Ltd.
Add to Cart
Chrome Plated Stationary Barrel Rod Insert Pump
Chrome Plated stationary barrel rod insert pump description:
Rod pumps also are called insert pumps because they are run (inserted) in the production tubing.
There is a wide range of plunger (or pump-bore) sizes standardized by the industry. The API pump-bore sizes that are currently available range from 1 1/16 to 3 3/4 in. in diameter. This 1 1/16-in. size has been added back in the latest edition of the standard. Additionally, a new barrel type has been accepted in the latest API Spec. 11AX. This is the "X-type" barrel. It has a thin-walled barrel configuration for threads on either end of the heavy-walled barrel and is available for metal plungers only. This type of pump does not require the extension couplings normally needed for heavy-walled barrel pumps. Thus, this pump reduces the burst or collapse concerns of the thin-walled extension couplings and allows deeper producing depths to be attained.
Our sucker rod pumps can be furnished with the components most suitable for your field of application and pumping operations can easily be extended to corrosive environments.
To achieve maximum performance,API subsurface pumps are machined with extra small clearance between the plunger and the inside wall of the barrel.
Rod inserted pump API parameters table:
| API Model | Thin wall rod pump | Thick wall rod pump |
| Pump diameter (in) | 1 1/4-2 1/2 | 1 1/4-2 1/2 |
| Plunger length (ft) | 2-24 | |
| Barrel length (ft) | 2-34 | |
| Material | Barrel: A1~A6, B1~B6, C1~C5, D1~D5, N1~N6 Plunger: B1~B3, C1~C3, D1~D3, E1~E3, F1~F3 | |
Sucker Rod Pump Pictures
